GENERAL EAST CO.,LTD
Your Partner For Modern Transportation Vehicles !!!
Add to Cart
| EXPEDITION BOX/CAMPER WITH FRP-Pie Panel BOX _FOR EXPEDITION OR TRAVEL | |||
| MODEL: | Expedition Box | ||
| FRP-Pie Panel BOX is a pre-installed truck box which can be mounted directly onto the chassis of the vehicle using its lower fixed frame, This TRUCK BODY made with our FRP-Pie Panel Kits , can make the modular Expedition box for the RV MOTORHOME or Camper box with inside Furniture layout. As this box is Original German Technology , with wet-in wet process made, all the surface FRP are made with the rude Fibre glass material with an chemical process, so all the panels is sealed wtih the FRP, and made the panel as an whole like a pie. so we called FRP-Pie Modular Panel. So it is the super best choice for the expedition box , the real expedition box even -30-50 degree. So all the design have to be confirmed before producing . | |||
| What is a Flatbed Truck Camper? Truck campers mounted on pickup trucks are the most popular. A unit referred to as a slide-in, or cab-over is lowered or slid into the bed of the pickup then secured in place using tie-downs and turnbuckles. Pickup campers can be mounted on trucks as small as half-ton models, also known as light-duty pickups, such as the Ford F-150, Ram 1500, Chevrolet Silverado 1500, GMC Sierra 1500, Nissan Titan and Toyota Tundra. These trucks are rated to carry loads up 1,000 lbs. making them suitable for small slide-ins. Larger camper units require a three-quarter or one-ton pickup. Flatbed truck campers are mounted on trucks with a flatbed. And as the name suggests, they are built with no fixed sides, tailgate or roof. Tie-downs are typically located along the side of the trailer. Some people remove the truck bed from their pickup truck and replace it with a flatbed. Some flatbed truck and campers can range up to 53 feet long, accommodating a larger, more roomy camper body, although most camper bodies are 6.5 to 11.5 feet in length. The resulting vehicle often looks much like a Class C RV. The difference being that the camper portion can be lifted off, allowing the vehicle underneath to revert to use as a truck. | |||
| GENERAL PARAMETERS | |||
| K .Value for the Composite Box | 0.295 W/m2 ºC | ||
| Max. Overall Length | 48 ft | 14,750 mm | 0~14750mm can choose |
| Max. Overall Width | 10 ft | 3,200 mm | 0~ 3200 mm can choose |
| Max. Overall Height | 10 ft | 3,200 mm | 0~3200 mm can choose |
| Max. Floor Thinckness | 4 .13 inch | 105 mm | 45-105mm can choose |
| Side Wall Thickness | 3 .31 inch | 84 mm | 45-105mm can choose |
| Front Wall Thickness | 3 .31 inch | 84 mm | 45-105mm can choose |
| Rear Door Panel | 3 .31 inch | 84 mm | 45-105mm can choose |
| Roof Wall | 4 .13 inch | 105 mm | 45-105mm can choose |
| FRP 2mm/PUR:40kg/m³±2 FRP Panels (Excluding Floor) | |||||||
| Panel Details | Wall types | Thickness | Structure( Inter.Skin + Insulation+Exter. Skin) | Remark | |||
| Side Wall Panel | 80.00mm | FDA "Approvable" CFRP + XPS + FRP | |||||
| Front Wall Panel | 80.00mm | FDA "Approvable" CFRP + XPS + FRP | With Refrigeration Units Installation Embedded Beam | ||||
| Rear Wall Panel | 80.00mm | FDA "Approvable" CFRP + XPS + FRP | with Door Hinger Installation Embedded Strengthen | ||||
| Roof Wall Panel | 90.00mm | FDA "Approvable" CFRP (Interior) + XPS + Anti UV FRP (exterior) | |||||
| Floor Panel | 80.00mm | Aluminum Air Duct (Interior)+PUR (injection Foaming 45kg/m³)+FRP | With Cross Beam Embedded | ||||
| Standard: Floor with Alu.Duct for America Market Best Cold Air Circle | |
| |